Store-bought drain cleaners dissolve soap and light grease. They do nothing for root intrusion, grease buildup 40 feet in, or a collapsed pipe segment. Masters Plumbing Service's Drain Cleaning team in Fletcher arrives with professional-grade augers and hydro-jetting units that actually resolve the blockage.
📞 Call +1-855-718-1500 — Book Today
Every drain call we run in Fletcher, NC starts with identifying what type of blockage you're dealing with — because the method that clears a grease blockage efficiently is different from the one that handles root intrusion.
Hydro-jetting is the only method that restores full pipe diameter. A cable auger punches through a blockage; a jetter removes the blockage material from the pipe wall entirely, significantly extending the interval before the next cleaning is needed.
Before recommending any clearing method, we run a push-rod camera into the drain to visually confirm blockage type and location. Grease accumulation 30 feet in looks different from a root ball at a joint or a collapsed section — and each requires a different response.
Whether it's a backed-up bathroom sink or a full house sewer drain stoppage, our team carries the right nozzle sizes and cable diameters for the specific pipe we're clearing.
Our written service report notes the blockage type, location, method used, and any structural observations from the camera run. You walk away knowing the state of your drain system, not just that the water is flowing again.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Fletcher, NC have the equipment and training to clear it.
Grease blockages in kitchen drain lines often occur 10–40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Hair and soap scum are the most common bathroom drain blockages. They bond to the pipe walls inside the p-trap and in the drain arm, forming a mat that progressively constricts flow. Our techs remove the drain cover, clear the p-trap obstruction with a hand snake or drum auger, and flush the line.
Root intrusion at pipe joints is the leading cause of main sewer blockages in homes over 20 years old. Our electric root cutter attachment on the sectional cable removes the root mass; we then scope again to confirm the line is clear before pulling equipment.
Basement floor drains and laundry room drains often go years without cleaning and can develop sediment, lint, and mineral scale blockages. We clear these drains with an electric snake and flush thoroughly to confirm full flow before closing out the job.
Restaurants, multi-family buildings, and homes with chronic grease or root problems benefit from scheduled hydro-jet maintenance on a 12–24 month cycle. We map the drain system, document baseline camera footage, jet the lines, and re-scope to confirm clean pipe walls. This approach prevents emergency backups rather than reacting to them.
Sometimes the question isn't just "why is this draining slowly" but "what is the actual condition of this pipe system." We run a recorded CCTV inspection with distance markings and provide a written report noting blockage types, root intrusion points, joint offsets, pipe material, and any visible structural defects.
We don't show up and start snaking blind. Our approach uses a camera-first diagnostic protocol to confirm what we're clearing before selecting the method.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
The camera also gives us the distance to the blockage and confirms the pipe diameter — both factors in selecting the right clearing method and nozzle size.
Based on the camera findings, we present you with a flat-rate quote and explain exactly which method we're using — electric auger, hydro-jet, root cutter — and why. No work begins until you approve.
If anything was found during the camera run that warrants monitoring or repair, it's noted in the written report so you have a record — useful for planning future maintenance or a repair conversation.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
Main line backed up completely on a Sunday. Found Masters Plumbing Service and they came within 2 hours. Camera found a 3-inch grease plug combined with roots at a joint. Cleared both with cable and jetter, sent me the scope video via email. Super transparent process.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Masters Plumbing Service provides professional Drain Cleaning across Fletcher and the surrounding Fletcher, NC service area. Same-day service is available on most calls — call to check today's availability.

Stop pouring chemicals down the drain and getting two-day results. Our drain techs in Fletcher, NC use the right equipment to clear it properly and confirm it's clear on camera before we leave.
📞 Call +1-855-718-1500 Now